Shipping throughout Russia and to other countries

The SCPD degassing parameters monitoring station is designed for continuous automatic monitoring of degassing parameters during the development and operation of coal deposits containing methane in coal seams and the host rock mass. SKPD allows calculating the total flow rate of the methane-air mixture (MVS) and the flow rate of methane in the degassing pipeline and bringing the calculated values to normal conditions

SKPD provides the following main functions:
  • measurement of the volume fraction of methane in the range of 0-100% vol.
  • measurement of the volume fraction of oxygen in the range of 0-25% vol.
  • measurement of the volume fraction of carbon monoxide (CO) in the ranges: 0-100 ppm and 100-200 ppm.
  • measurement of differential gas pressure in the range: 0-200 mm of water.st.
  • measurement of absolute gas pressure in the range: 400-1200 mmHg.
  • measurement of the gas temperature in front of the diaphragm in the range of -5 ... +35C.
  • processing of measurement results.
  • calculation of the reduced MVS consumption.
  • calculation of the reduced methane consumption.
  • display of the measured parameters on the built-in liquid crystal display (LCD).
  • conversion of each of the measured and calculated parameters into digital signals for transmission via a digital port via a wired channel (RS-485 Modbus RTU), as well as analog output signals at a voltage of 0.4-2.0 V.
  • local and telesignalization of the refusal.
  • local alarm about the presence of power supply voltage.
DOCUMENTATION

Product catalog

All AE'ROTEST products

The group "New Technologies" offers for review the products of the plant AE'ROTEST: explosion-proof head lamps, portable gas analyzers, stationary sensors, methane-air mixture generator, automatic charging stations, automatic charger
  • Explosion-proof lamps AE'ROTEST
    Explosion-proof lamps
    Beam 2, Beam 3, Beam 2M, Beam 3M, etc.
  • Portable gas analyzers AE'ROTEST
    Portable gas analyzers
    ATEST-1.M ATEST-1.D ATEST-1.With
  • Stationary pressure sensors AE'ROTEST
    Stationary pressure sensors
    SD-1.ID.V, SD-1.ID.G et al .
  • Mixture Generator AE'ROTEST
    Mixture Generator
    GS-1 and others.
  • Charging stations AE'ROTEST
    Charging stations
    Gas station-2-54 GAS station-2-54S/T GAS station-2-54.D
  • Power sources AE'ROTEST
    Power sources
    SIIP, SIIP-2, etc.
  • Control station AE'ROTEST
    Control station
    SKPD , etc .
  • Battery charger AE'ROTEST
    Battery charger
    ZU-1 and others.
  • Automatic station AE'ROTEST
    Automatic station
    ATS-1-20, etc.

About AE'ROTEST

AEROTEST was established in 1998. AEROTEST develops and manufactures equipment and devices for mining lamps, chargers, gas analysis equipment and process control equipment. It is also engaged in small-scale production of electronic equipment, surface mounting, design of printed circuit boards and stencils.
  • PRINTED CIRCUIT BOARDS

    The company has a site for the installation and configuration of printed circuit boards, which provides the needs of its own production, as well as the execution of third-party orders for the installation of small and medium-sized batches of printed circuit boards.
  • PLASTIC PARTS

    Casting is possible, both with the use of the customer's mold, and the development and manufacture of the mold according to the product drawings and subsequent casting using the manufactured mold.
  • METALWORKING

    At the metalworking site, it is possible to perform turning, milling, locksmith and welding works in accordance with the customer's requirements.

Information Board AE'ROTEST

Learn more about our products AE'ROTEST.
  • Product catalog. производства АЭРОТЕСТ
    Product catalog.

NEW TECHNOLOGIES GROUP

For sales and support please contact